9
Notes:For additional Universal Remote Programming instructions and product identification codes, please refer to the
operating manual inclosed with this Universal Remote Control.
This remote control has 3 operating modes as follows;
OSD (On Screen Display) mode: Allows you to look at information about basic operation of this unit on your monitor TV
and to operate this unit by moving an arrow that appears on the screen of your monitor
TV.
Sherwood mode: Allows you to operate this unit and other Sherwood components like cassette decks, CD players and
equalizers, etc. (To operate other Sherwood components, you should make the DIGI LINK connections
between them)
Non-Sherwood mode: Allows you to operate non-Sherwood audio and video components that are remote compatible.
Notes:
The set-up code for each component must be entered before operation.
For set-up codes (product identification codes), please refer to “Set-Up Code Tables” in the operating manual of this
remote control.
Operation buttons may have different functions according to each operation mode.
Be sure to set the remote control to the correct mode before trying to operate any component.
This section explains the basic functions for Sherwood or OSD mode. For the non-Sherwood mode, refer to the operating
manual of this remote control.
Sherwood components bearing the DIGI LINK (II or III) logo can be used with this remote control.
For system remote control operation, first make the DIGI LINK connections between Sherwood components.
The numbered buttons on the remote control have different functions in different modes. For details, refer to the
“FUNCTION TABLE of the NUMBERED BUTTONS” on following page.
ENGLISH
