Sherwood Scientific 860 00 009, Руководство по эксплуатации

Страница: 13 / 29

Sherwood M860 Autosampler
860 91 001 Issue 11 20
th
December 2017 ECN 3146 - 13 -
3.0 – Instrument Principles of Operation
continued
3.3 Use without a Diluter
(DIP switch 7 ON – see section 6.1)
When used without a Diluter, the Model 860 positions the Autosampler Probe
into each Blank, Calibration and Measurement Sample and the M420 Series
Flame Photometer itself draws the liquid into the Nebuliser for aspiration into
the flame. The Model 860 sends a signal to the Flame Photometer immediately
the Autosampler Probe descends into the sample to start the countdown of the
instrument’s set delay time prior to initiating signal processing to make the
measurement.
3.4 Use with M410 and
BlueNotes
BlueNotes BlueNotes
BlueNotes
for 410 Software
Refer to the operator manual of the
BlueNotes
for M410 for details of
connection, set-up and use with an M410 Flame Photometer.
3.5 Use with M420 Series Instruments and 420
BlueNotes BlueNotes BlueNotes BlueNotes
Software
Refer to the operator manuals of the M420
BlueNotes
or Regulated 420
BlueNotes
(which ever version is being operated) for details of connection,
set-up and use with M420 Series Flame Photometers.