Sherpa ST-MT340, Руководство оператора

Страница: 14 / 36

OPERATION
Set the on/off switch (1) to on (-) position.
Ensure the choke lever (CL) is in the CHOKE
position.
Prime the engine 5-10 times by pushing the down
on the primer bulb firmly (PB).
Place the unit on a flat, firm surface. Keep the
cutting head clear of anything around.
While holding the unit firmly, pull the out starter
handle (SH) quickly. Repeat this until the engine
fires.
Allow the engine to cut out.
Set the throttle trigger to the start position
OR set the choke lever to RUN position.
Restart the engine.
Allow the engine to warm up for a several minutes
before starting operation.
(PB)
(SH)
(CL)