Sherman hobby MIG 130F Скачать руководство пользователя страница 7

Страница: 7 / 11

Close from s Æ holder parts to be welded, so that the distance SC me ę between the nozzles and and the welded parts was approx.

Close from s Æ holder parts to be welded, so that the distance SC me ę between the nozzles and and the welded parts was approx.
10 mm. press rte d button on the handle and start welding rte d

10 mm. press rte d button on the handle and start welding rte d

10 mm. press rte d button on the handle and start welding rte d
welding. Releasing the finish ñ or welding process

welding. Releasing the finish ñ or welding process

WARNING! It is forbidden ę switch and switching current ranges and the welding during the welding process. Mo from E is a cause Æ electrical short

WARNING! It is forbidden ę switch and switching current ranges and the welding during the welding process. Mo from E is a cause Æ electrical short
and damage the device and device. To do this, from s break Æ welding and change Æ switch and towel range pr and du.

and damage the device and device. To do this, from s break Æ welding and change Æ switch and towel range pr and du.

9. Before calling service,

In the event of a malfunction device and equipment, welding before sending to the site should from s check Æ letter ę basic failure and try Æ remove

In the event of a malfunction device and equipment, welding before sending to the site should from s check Æ letter ę basic failure and try Æ remove
them yourself rte d.

them yourself rte d.

Any repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Warning! office and device

Any repair device and devices can and would Æ made off and only after disconnecting and combined the power plug from the socket and lying. Warning! office and device
is not sealed and in from Users can from e pictures rte d housing ę welding in order to remove ę cutting minor breakdowns.

is not sealed and in from Users can from e pictures rte d housing ę welding in order to remove ę cutting minor breakdowns.

symptoms

Cause

fast ę seriously

No power, signal failure or malfunction
device and equipment

device and equipment

No calls and or loose connection from inside the plug and inside the office and equipment

check Æ and improve Æ half and connection of all electrical plugs

check Æ and improve Æ half and connection of all electrical plugs
inside and inside the office and equipment

inside and inside the office and equipment

No feed of the electrode wire (feeder
motor is running)

Weak pressure rollers

set Æ correct pressure

the incorrect ś Pistachio ś diameter of the roll groove

the incorrect ś Pistachio ś diameter of the roll groove
leading and more

leading and more

assumptions from s Æ WŁA ś CIW and roll ę leading and c and

Contaminated guide wire holder Clean ś these Æ Locked guide wire electrode wire electrode in the church ñ cówce pr and

Contaminated guide wire holder Clean ś these Æ Locked guide wire electrode wire electrode in the church ñ cówce pr and
motive

replace Æ ko ñ tip ę pr and dow and

Irregular wire feed electrode

damaged wheels ñ spout pr and Judicial

replace Æ ko ñ tip ę pr and dow and

Please roll groove and More is dirty or damaged

Clean ś these Æ roll groove or replace Æ roll ę

Spool of wire rubs against the ś The walls of the cover welder

fixings Æ correctly reels ę wire

Not bow strikes out ę

No WŁA ś proper contact wire crimp mass

improve Æ mass contact terminal

faulty switch and MIG switch in the handle

replace Æ switch and switch

the incorrect ś competent connected and MIG connection to the office and equipment

check Æ connection status and June ñ electric holder

Arc too long and irregular

Napi ę of welding too high

decrease Æ voltage ę a welding

pr ę speed SC Wire feed for small

Zwi ę greater Æ pr ę speed SC a wire

Arc too short

Napi ę a welding too low

Zwi ę greater Æ voltage ę a welding

pr ę speed SC Wire feed for large from and

decrease Æ pr ę speed SC a wire

after incl and combined power indicator light est and

after incl and combined power indicator light est and
no power connection
ś lit ę

ś lit ę

No voltage ę power cut

check Æ He joins the fuses and feel the network

Ś lit ę LED overheating

office and device has been overheated.

wait Æ a few minutes from LED shuts off ś and not

wait Æ a few minutes from LED shuts off ś and not
continue Æ welding.

continue Æ welding.

The fan is not working

The fan was blocked folded ę t and

shields and

upright Æ shields ę fan

unsatisfactory and as ca SC weld

Inadequate or poor as ś you in from or part of the

Inadequate or poor as ś you in from or part of the
materials used rts those supplies,

materials used rts those supplies,

replace Æ part rts those supplies. change Æ welding wire for

replace Æ part rts those supplies. change Æ welding wire for
wire samoosłonowy company Kiswel

the incorrect ś Competent welding wire

assumptions from s Æ wire samoosłonowy company Kiswel

10. OPERATING INSTRUCTIONS

Operation semi-automatic MIG welding 130F should be done Æ si ę in an atmosphere free from components from r and smokers and du from ego dust. Do

Operation semi-automatic MIG welding 130F should be done Æ si ę in an atmosphere free from components from r and smokers and du from ego dust. Do
not from s sets Æ device and equipment in a dusty, near from at work and grinders etc. smokers. It should from avoided Æ operation in ś environments with high from

not from s sets Æ device and equipment in a dusty, near from at work and grinders etc. smokers. It should from avoided Æ operation in ś environments with high from

not from s sets Æ device and equipment in a dusty, near from at work and grinders etc. smokers. It should from avoided Æ operation in ś environments with high from
humidity above ś you, and in particular ś in these situations occur ę proceedings of dew on the metal parts. In the case of occurrence and sleep dew on the

humidity above ś you, and in particular ś in these situations occur ę proceedings of dew on the metal parts. In the case of occurrence and sleep dew on the

humidity above ś you, and in particular ś in these situations occur ę proceedings of dew on the metal parts. In the case of occurrence and sleep dew on the
metal parts, eg. after the cold office and Equipment to be a warm room from s wait Æ until disappearance ę cut dew. It is recommended ę in the case of

metal parts, eg. after the cold office and Equipment to be a warm room from s wait Æ until disappearance ę cut dew. It is recommended ę in the case of

metal parts, eg. after the cold office and Equipment to be a warm room from s wait Æ until disappearance ę cut dew. It is recommended ę in the case of
welding operation outdoor place it under a roof to protect against adverse weather conditions. office and MIG device should be 130F Æ operated in next ę following

welding operation outdoor place it under a roof to protect against adverse weather conditions. office and MIG device should be 130F Æ operated in next ę following

welding operation outdoor place it under a roof to protect against adverse weather conditions. office and MIG device should be 130F Æ operated in next ę following
and conditions:

and conditions:

value changes ś you effective voltage ę Power cut no wi ę greater than from 10%

ambient temperature of from -10 ° C to + 40 ° C

these ś Atmospheric pressure 860 to 1060 hPa