9
kit number. Pressing the button again
within 10 seconds will remember the current one
within 10 seconds will remember the current one
settings under the currently set number. If the button is not pressed again for 10 seconds, the device will return to the main menu.
If the device is turned off while the parameter set is loaded in memory, when it is switched on again, the last used set will be automatically loaded
and its number will appear on the display. If no parameter set is loaded into the memory and the device is turned off, after switching on again the last
used parameters will be restored and a dash will appear on the display (H).
E - Source selection mode button (two-stroke / four-stroke)
Only active when TIG welding. Mode selection is signaled by lighting up
2T symbol for the double-touch mode or the corresponding LED
4T
for four-stroke mode. In double-touch mode, pressing the switch on the handle of
2T symbol for the double-touch mode or the corresponding LED
4T
for four-stroke mode. In double-touch mode, pressing the switch on the handle of
2T symbol for the double-touch mode or the corresponding LED
4T
for four-stroke mode. In double-touch mode, pressing the switch on the handle of
the handle will turn on the ionizer and ignite the arc. Welding is carried out with the switch pressed. Releasing the switch will end welding. In the
four-stroke mode, pressing the switch in the handle of the handle will turn on the ionizer and ignite the arc then release the switch and weld with the
switch released. Pressing the switch again will end welding.
F - Parameter set memory display
USER
The display indicates the number of the parameter set that has been loaded or under which the current set will be saved.
G - welding parameter display
OC
REMOTE
ASH%
OT
The display indicates the parameters during setting and during welding. The lighting of the corresponding LED on the side of the display
indicates the unit of the parameter.
The display also has additional indicator lights: