14
Sptt
Spot welding. Pressing the torch will Pre-gas and arc ignition. After the time Sppt will extinguish the arc and Post-gas. Earlier releasing the handle will
immediately extinguish the arc and Post-gas.
Stop
Sptt
Sptt
Continuous spot welding. Pressing the torch will Pre-gas and arc ignition. After the time Sptt will extinguish the arc. After the time will stop re-ignition of
the arc and the cycle will continue until the button is released uchwytu.Wtedy will extinguish the arc and Post-gas.
E - welded material selection button.
The only active during MIG / MAG modes
.
and
.
It is used to select the welding material. Selecting the appropriate mode is confirmed by lighting of the LED. In mode
there are all kinds of material modes
and
it is not available
.
-
welding of carbon steel in the cover CO
2.
welding of carbon steel in the cover CO
2.
- magnesium aluminum alloy welding argon.
