SYSTEM ALIVE / SUPERVISION FEATURE:
It is recommended that you enable this function if you are installing a Wireless Mimic base unit Model:
MB3000 Ver4
, as the Mimic base unit will monitor the system alive signals from each repeater. If a
Repeater malfunctions or is removed from the system the Mimic base will report the problem within a 24
hour window time period. You will need to Learn in the System alive signal to the mimic base before it
will become active.
Please follow the procedure below to learn in the System alive signal to the MB3000 mimic base
unit.
24/07/2007 21:26:13
Memory
---- STORE REPEATER ----
Repeater 1
+1 +10 Store Ok
Press the far right button
to enter the Main Menu.
Press far left to move the
Arrow down to [5], then
press the far right
Ok button.
Press either
+1
or
+10
to
select the Repeater Location:
you want to Store a repeater.
Press
Store
followed by bridging the
Supervision jumpers to the ON
position. Wait until the “Active”
appears on the screen.
Press the far right
Ok
button to
return to the main menu.
Step2
Step3
Step4
Step1
Use the
Up
,
Down
and
Next
button to enter the
PIN no: The default is
1;2;3;4. Pin no’s can
be changed in the Main
menu on option [7]
[5]Add/Del Repeater
[6]GSM Number
[7]Change PIN no
[8]Exit
24/07/2007 21:26:13
Memory
---- STORE REPEATER ----
Repeater 1
+1 +10 Store Ok
Step2
Step3
Step4
Step1
[5]Add/Del Repeater
[6]GSM Number
[7]Change PIN no
[8]Exit
Ok
Menu
— ENTER PASSWORD ---
1 2 3 4
Up Dn Next Ok
Page 7
Signal masking is a technique we have implemented which records the amount of signals received by a
particular remote control. If the same remote control is repeatedly transmitting the frequency will be highly
congested with RF noise and will cause interference on its self. We mask out signals that are received
more than 5 times in a 30 second period which are the same code. The mask period is 1 minute. Once the
minute has elapsed the Remote control will be repeated out if it is received by the repeater unit.
The reason we have implemented this feature is to ensure that transmitters that are connected to motion
detectors or beams do not cause continuos signal activation on a Panic system.
SIGNAL MASKING EXPLAINED:
