S
ERVICE
A I R S U P P L Y
We suggest you use a pressure regulator and automatic oiling / filtering system on the main air
supply, to ensure its maximum life cycle with reliable trouble free use.
N
OSE KIT ASSEMBLY
A S S E M B L Y I N S T R U C T I O N S
IMPORTANT
DISCONNECT THE AIR SUPPLY WHEN SETTING UP
OR REMOVING A NOSE ASSEMBLY.
•
Choose the proper nose assembly.
•
Remove the nose case, if still mounted.
•
Unscrew the adaptor nut while moving away the stop pins.
•
Insert hex driver
4
into spindle, place socket head cap screw (mandrel)
3
on to hex driver
4
and reducing sleeve
5
on
3
.
•
Hold the adaptor nut, ensure the stop pins are seated in the last possible notch on the adapter
nut (may require you to turn forward 1 notch).
•
Screw on the nose casing and the nose tip
1
with the lock nut
2
on it.
•
To remove the equipment, do the reverse operation.
Nose Casing
www.sherex.com
866-4SHEREX 400 Riverwalk Pkwy, Suite 600 ~ Tonawanda, NY, 14150
5
PLACING RIVET NUT ONTO MANDREL- LENGTH CHECK
•
Keeping the tool disconnected from air supply, place an insert on mandrel
3
adjust
item
1
in
order to match the insert and mandrel end. It is ideal to have 1-2 threads of the mandrel
protruding from the back of the rivet nut. This will ensure full thread engagement during the
installation process, lock position by threading
2
against nose casing.
Nose assemblies should be serviced weekly.
Any damaged or worn out parts should be replaced.
Check for mandrel wear and replace when necessary. Sherex recommends using high quality socket
head cap screws such as Unbrako® and Holo-Krome®.