Shenzhen v-sun Electronics TLT-2H, Инструкция по эксплуатации

Страница: 29 / 36

Instruction
Instruction Instruction
Instruction Manual
Manual Manual
Manual V3.0
V3.0 V3.0
V3.0 for
for for
for TLT-
TLT- TLT-
TLT-2H
2H 2H
2H GPS/GSM
GPS/GSM GPS/GSM
GPS/GSM On-Vehicle
On-Vehicle On-Vehicle
On-Vehicle Tracker
Tracker Tracker
Tracker
29 29 29 29////36 36 36 36
Description: After receiving the instruction, TLT-2H will return confirmation message: SET SERVER IP AND
PORT OK.
5
5
5 5.... Set
Set
Set Set timing
timing
timing timing data
data
data data upload
upload
upload upload
Timing data upload has the following two modes: traveling car tracking mode and turn-off mode. In
accordance with different settings of GPS sampling time and upload quantity, data are intensively uploaded to
display real-time trace with more detail in the event of traveling car. Fewer data are uploaded to save SIM flow
charge as well as ensure some tracking effects in case of turnoff.
1>Timing 1>Timing 1>Timing 1>Timing upload upload upload upload mode mode mode mode for for for for traveling traveling traveling traveling vehicle vehicle vehicle vehicle tracking tracking tracking tracking
Instruction format: #805# user password# sampling interval T# uploaded data quantity each time N##
For example: #805#0000#10#6##
Description: After receiving the instruction and confirming that user password is correct, TLT-2H will send
confirmation message to the sender “SET GPS SAMPLING TIME AND QUANTITY OK”.
Note: 1. Sampling time T takes second as unit, whose defined domain is [10, 59999]. Uploaded data item
number N for each time has a defined domain of [1, 50].
2. If data is not sent to the server due to network problem or other cause, the data will be backed up
automatically and sent to the server again after network resumes to normal. data status is AUTO.
3. If “uploaded data quantity N for each time” is 0, the device will turn off timing upload and send
confirmation message to the sender: GPRS TIMER STOP.
2>Timing 2>Timing 2>Timing 2>Timing upload upload upload upload mode mode mode mode for for for for parking parking parking parking throttle throttle throttle throttle
Instruction format: #809# user password#X#Y##
For example: #809#0000#10#6##
Description: After receiving the instruction and confirming that user password is correct, TLT-2H will send
confirmation message to the sender “GPRS REPORT SAMPLING 2 OK”.
Note: 1. Sampling time X takes second as unit, whose defined domain is [10, 59999]. Uploaded data number
Y for each time has a defined domain of [1, 50].
2. If data is not sent to the server due to network problem or other cause, the data will be backed up
automatically and sent to the server again after network resume normal. Uploaded data format is as shown in
position information of “immediately upload current position instruction” in GPRS mode and data status is
AUTOLOW.
3. If “uploaded data quantity Y for each time” is set as 0, the device will turn off timing upload and send
confirmation message to the sender: GPRS REPORT SAMPLING 2 STOP.
4. In the above two modes, 300 pieces of data may be backed up for complementary report for blind area.
After exceeding 300 pieces, new data will automatically override former backup data.