off, the FIXED WIRELESS TERMINAL fails to get registered.
4.7.3 Phone;
Indicator light for “In Use”, When the telephone set is picked up, this light is
on; when the telephone set is hung up, this light is off; when there is an incoming phone,
this light blinks every 100ms; when the FIXED WIRELESS TERMINAL is used for Internet
connection, this light blinks every 1 second.
4.7.4 GSM signal strength indicator (ST0-ST2):
Indicator light for GSM signal strength;
when the PWR indicator light is blinking, these indicator lights stand for signal strength;
ST0, ST1, ST2 are all on, the strongest signal; ST0, ST1 are on, normal signal strength;
only ST0 on, weak signal strength. When PWR indicator light is steadily on, ST0, ST1,
ST2 stand for error, Refer to the error code in troubleshooting part.
5.User Instructions:
5.1Unpacking and checking list:
Each pack includes:
One set of GSM FIXED WIRELESS TERMINAL;
One piece of antenna;
One piece of power supply adaptor;
Four pieces of rechargeable batteries;
One copy of user manual;
One telephone line for the connection between GSM FIXED WIRELESS TERMINAL and
the telephone set;
If you find any of the aforesaid unavailable or damaged, contact the distributor or the
operator immediately.
5.2 GSM FIXED WIRELESS TERMINAL: OUTER APPEARNCE:
(Back View)
PWR: power supply receptacle
Phone: telephone interface
Serial: serial port; for the connection with computer
(Side Elevation)
ANT: external antenna
GSM FIXED WIRELESS TERMINAL 7 USER MANUAL
