Shenzhen Tomacro IimHD 310s, Руководство пользователя

Страница: 20 / 45

19
2. Standard definition connection
1). Standard definition component video (YPbPr)
Same as above.
2). S video
S-Video, short for Separate Video, is one of the video interfaces most commonly used. It
transfers Luminance and Chroma signals separately. To a greater extent it avoids image
distortion caused by signal-to-crosstalk and higher image quality can be provided. S-video is
combined by five signals - two Y signals, two C signals and one common shield ground.
3) Composite Video Output
The interface of composite Video is a standard yellow RCA plug, which is the most commonly
used so far. Composite Video, composite by Y/C, is a kind of video signal that supports low
quality image. Generally, the resolution can only reach to 350-450 scan lines and therefore is not
recommended.
5.5.2 Audio connection
There are analog stereo and digital stereo. Please choose appropriate audio outputs. The following
table is for your reference:
Audio Output
Maximal Channels Remarks
HDMI 1.3 7.1 Digital Audio: HDMI 1.3 amplifier is needed
Coaxial SPDIF 5.1 Digital Audio: digital audio decoder or amplifier is needed
Optical SPDIF 5.1 Digital Audio: digital audio decoder or amplifier is needed
Analog L/R 2 Analog stereo with left and right channels