Operation instruction
7
RS232 control:
illustrates the schematics of the RS232 connector used for the RS232 channel or for the UART debug connector.
TO debug ports
Connection Diagram
Application
-1
-2
Application
-2
7
CONNECTING AND OPERATING
1) Connect the HDMI signal sources (Such as DVD, STB etc) to HDMI Transmitter.
2) Connect cat5e/6 cables to both HDBaseT port of the transmitter and HDBaseT port of the Receiver.
3) Connect the HDMI output (Such as HD-LCD, HD-DLP) into the Receiver.
4) Connect the IR-TX cables into transmitter IR-TX portS on the back panel and affix the emitter onto the source IR
windows ,Connect the IR-TX cables into receiver IR-TX portS on the back panel and affix the emitter onto the sink
IR windows.
5)
Connect the 48V DC power supply into transmitter p
ower port or receiver power port. (DO NOT connect 48V DC power supply
for both of transmitter and receiver )
Attention: Insert/Extract cables gently.
