3
BASIC OPERATIONS
Turning headset on/off
1.
Turning the headset on
Press and hold MFB Button for about
3
seconds, the blue indicator of the headset will flash 2
times rapidly. The headset is now turned on.
2.
Turning the headset off
Press and hold MFB Button for about 3 seconds, the indicator will be on
blue
for
2s. Then the headset is off.
3. When the headset is low battery, it will quickly beep 5 tim
e
s every 10 seconds.
Please charge the headset.
Pairing
Pairing will create a unique and encrypted wireless link between two Bluetooth
enabled devices, such as your Bluetooth phone and Bluetooth headset.
1. Ensure that the headset is off (see Turning headset on/off section).
2. Press and hold the MFB Button for about 5 seconds and
the indicator be on
blue stillness.
3. Set your Bluetooth phone to discover the headset by following your phone's
guide. Typically, the steps involve going to a ‘Setup’, 'Connect', or ‘Bluetooth’
menu on your phone and then selecting the option to discover Bluetooth devices.
4. Your phone will find the “BTK-901” headset and ask if you want to pair with
it. Confirm this by pressing the “Yes” or “OK” key.
5. Enter a passkey or PIN code “0000” (4 zeros), then press the “Yes” or “OK”
key.
6. Once the headset successfully connected with mobile phone, the indicator will
flashes 1 time every 7 seconds. Otherwise, the indicator will flash blue 2 times
every 5 seconds.
IMPORTANT: If the pairing can’t be completed within 120 seconds while the
pairing mode is activated, that meant the pairing was unsuccessful, please repeat
Step 1 to Step 5 to pair the headset and the mobile phone again.
