2
3) The headset will be fully charged in approximately 1-2 hours.
4) Remove the travel charger from the AC socket.
WARNING:
Do not attempt to charge the dongle with anything other than the travel charger provided.
Using unauthorized travel charger may damage the dongle.
IMPORTANT:
The dongle cannot be used while charging.
BASIC OPERATIONS
Please make sure that your dongle is connected with the audio device or PC by plugging
the dongle into 3.5mm earphone jack in the audio or PC.
Turning the dongle on/off
1. To turn the dongle on
Press and hold Power Button for about 2 seconds, the blue indicator of the dongle will flash for 1 second.
The dongle is now turned on.
2. To turn the dongle off
Press and hold Power Button for about 5 seconds, the red indicator of the dongle will flash for 1 second.
The dongle will be turned off.
3. When the blue indicator flashes red, it means the headset is on low battery, please charge the
headset.
Pairing
Before using your dongle for the first time, you must pair it with your Bluetooth stereo headset.
1.
Ensure that the dongle is on (
see “To turn the dongle on”
section). And make sure the Bluetooth
Stereo Headset is under pairing mode.
2.
Press and hold Power Button for about 2 seconds until the indicator light alternately flashes blue and
red
，
your dongle is under pairing mode.
3.
Then the dongle will be connected with the Bluetooth stereo headset after few seconds.
If you want to connect with the second Bluetooth stereo headset, please follow the procedures as
follows:
1. Press and hold Power Button for about 2 seconds until the indicator light alternately flashes blue and
red, and the dongle will disconnect with the first Bluetooth stereo headset.
2. Then the dongle will be connected with the second Bluetooth stereo headset after few seconds.
3. Press Power Button twice to reconnect with the first Bluetooth stereo headset.
Connect with two Bluetooth Stereo Headsets at the same time:
1. Ensure that the dongle is on (
see “To turn the dongle on”
section). And make sure the two Bluetooth
Stereo Headsets are under pairing mode.
2. Press and hold Power Button for about 2 seconds until the indicator light alternately flashes blue and