Active Device
For quick field installation need, it will go to deep sleep mode after cell battery is placed. If we want to active the device,
we can long press the button for around 5 seconds, the buzz will sound for several times, and LED will flash. Now it running.
Congregation, it works well and enjoy it.
Tips: In case of call center service personal maybe need pare the fall detector and console in advance. There are about
1 minutes for them to operate it and let it back to deep sleep mode.(After around 1 minutes, it can’t go back to deep sleep
mode anymore before it lose power from cell battery.
LED Lamp Indication
Green flash: Is working;
Green and red flash alternately: Low battery;
Red flash: Fail to contact Medical Alert Console (or haven't be pared with it).
Easy wearable
watch band
/ neck rope style
Step 1.
Make the neck rope go through the hook.
Change to watch band
Step 1.
Take off the neck rope on the fall detection pendent;
Step 2.
As image showing, connect the watch bands.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
