13
4.
Control Speed Dome through NetDVR
In this application the Speed Dome RS485 port connects to NetDVR RS485 port. Multiple speed domes may have same address (ID) if their RS485 ports connect to
different NetDVR separately. Operation steps are:
Step 1: Set every NetDVR device ID an exclusive number such as 01, 02, 03, and so on.
Step 2: Set every speed dome address (ID) an exclusive number such as 01, 02, 03, and so on. These speed domes are all connected to one NetDVR.
Step 3: Press “Shift’ key to enter NetDVR working mode
Step 4: Press “Addr” key then input NetDVR device ID to select a target NetDVR device.
Step 5: Press “Enter” key to confirm your selection.
Step 6: Press “PTZ” key then input a target speed dome ID number that you want to control.
Step 7: Begin PTZ control
Step 8: To change other speed dome just input the ID number then begin PTZ control.
ILDVR-2888 NetDVR & Speed Dome Keyboard User’s Guide
