I. H101 Operation Steps
Step 1: Pull-out Receiver From Presenter
There is a build-in receiver on the back of presenter H101. Please pull it out before using.
Step 2: Insert The Receiver Into The USB Port Of The Computer
Only one side of the receiver can be inserted into the USB port of the computer.
Step 3: The Receiver Establish Connection With The Computer
After the receiver is inserted into the USB port, it needs to establish a connection with the computer.
This step
can be completed within seconds generally. However for the following two cases, we need to wait a few more seconds
or minutes.
3.1 If the
computer is inserted for the first time by the receiver,
the computer will spend several minutes to
establish a connection with the receiver. The actual time depends on how fast the computer processes it (If you have
to wait for over 10 minutes, and the prompt message does not disappear, please pull it out and insert it again for
retry).
3.2 For earlier Windows operating systems, after
unplugging the receiver and immediately reinserting it again
,
you'd have to wait several seconds.
A simple way to check the completion of this step is to turn on the presenter and press and hold the key③.
When the mouse pointer can move with your wrist indicates that it is working correctly.
Step 4:
Locate The Computer Aided Software
H101 have many more powerful functions. However, you need to run the computer-aided software first. So
where is the software? This step is to guide you how to locate the H101 software.
Software download URLs are listed in the instructions and yellow strips that are stored in package.