Bluetooth 4.0
Sports Headset
06
05
07
10
#$%" &!
- Bluetooth Version : V4.0
- Supported devices: Bluetooth mobile phones,
Bluetooth speakers Bluetooth PC and other Bluetooth
devices
*+6 7899<*=
- Talk time: 10 Hours
- Music play: 8 Hours
- Charging time: 2.5 Hours
- Charging Voltage: DC 5V
?@789@
- Battery Capacity: 160mAh
J K" 8OQ<OXYZ[OQ\<XYZ
※
The actual time may vary from mobile phone types and
functions.
4.Bluetooth Indicator Status
Red indicator is on all the time
when charging
Charging
Work Status
Indicator Light Status
Remark
Switch on
Blue indicator flash 3 times
Switch off
Red indicator flash 1 time
Connection
Phone call
Play Music
Battery low
warning
Pairing Mode
Red and blue indicators take
turns to flash
Voice Prompts
Voice Prompts
Voice Prompts
Voice Prompts
Voice Prompts
6.Headset Charging
This headset is equipped with built-in non-detachable and
rechargeable battery.
Please make sure that the battery is charged full for the first
time use.
] 77 7"
! 7 &&"6
During the charging, indicator will turn to Red. If without
charging, please plug out the travel charger first, then
connect it again.
^7 7& &6_#"7
the travel charger from the power outlet and headset.
Red indicator will flash every
60 second
Blue indicator will flash 1 time
every 6 seconds
Blue indicator will flash 1 time
every 6 seconds
Blue indicator will flash 1 time
every 6 seconds
5.Wearing Style:
Put the neckband in the back of neck, make the eartips into
the ear and rotate it to fit the ear canal perfectly.
!6&_" 7`
repeatable charge and dis-charge.
^ & " 7__
Please do not dial or receive phone call during charging, and
please plug out the charger from the headset, then receive
the phone call. When the battery is low, the headset will
appear the prompt and the red indicator will flash.
10:30
KBJ-157N
※
If the headset turned off due to power failure during phone
calls, the call will switch to mobile phone automatically.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.