-
10
-
Alarm Off:Command"121#",Reply"121# ok".
Set the vibration alarm trigger duration:Command:"vibtime123456,n#",Reply"vibtime set ok",n stands
for 0-15seconds,It is 3s by default (That is, alarm information would be sent if there is a continuous
vibration for 3 seconds )
6.4 Move alarm
Command"move123456 xxx"."move"is the fixed command,"123456"is the tracker password,xxx can
be any number from 000~999,stands for moving distance for the set vehicle,send 000to cancel move
sensor,unit is meter.After it’s been set, you will get a reply "move ok,and your tracker will be checking
the car location. Once it’s out the limited distance. You will get and alarm information
immediately.Note that due to static drift in GPS positioning, it is recommended that the xxx setting be
more than 500..
6.5 Power off alarm
This tracker has power down alarm function, when the power supply is break, the tracker will notice
the center number by making call 6 times, and also it will send SMS to center and slave center
number to warning the car owner. If you receive this warning information, it means some try to
remove your tracker from your vehicle or your vehicle battery is removed by someone or the vehicle
battery power is running out. Please check and confirm your vehicle is safety.
Turn on SMS power alarm:Command"pwrsms123456,1",Reply"pwr sms alarm set ok".
Cancel SMS power alarm:Command"pwrsms123456,0",Reply"pwr sms alarm set ok".
Turn on calling power alarm:Command"pwrcall123456,1",Reply"pwr call alarm set ok".
Cancel calling power alarm:Command"pwrcall123456,0",Reply"pwr call alarm set ok".
6.6 Over speed alarm
Command "speed123456 100" (set) or "speed123456 000" (cancel) to the tracker. "speed" is the
fixed command,"123456" is the tracker password,100means the limited speed. Unit is km/h.After it’s
been set, you will get a reply by SMS "speed ok". Once tracker noticed that your vehicle velocity is
out of the limit, you will get alarm information directly from the tracker.
6.7 Remote Turn Off Car Engine( Need a cut rely)
Send SMS "DY" (disable the turn off engine) or "KY" (Remote turn off engine) to the tracker to disable
turn off the car engine or turn off the car engine, when the tracker turn off the car engine, the relay will
disconnect, the turn off car engine function need buy and install a optional external relay to cut off the
engine, the installation method please refer the above diagram. the tracker will reply "Main power off!".
If the tracker has no reply, please check the tracker work properly and confirm the SMS command is
right.
Attention: Turning off engine is very dangerous when car is driving, this will make the car difficult to
control and maybe cause a accident, please install and use this function carefully.
7. Tracker parameter setting:
