REV
：
A0
BD-8508G User manual
Page
2
/5
Shenzhen bondidea technology co.,limited
Pull out the receiver and the battery installation steps
1
．
Prepare one pair of new AAA battery
2
．
Use your thumb fastens the battery cover and push backward of the mouse. Take out the battery cover is OK.
3
．
Put the batteries into the battery cell according to the right pole. (Please don’t install in the opposite pole , or it will harm
the mouse )
4
．
Install battery cover is OK.
DPI switch function
1
．
DPI default 1600DPI
2
．
Press DPI key can switch between 1000,1600 DPI
3
．
Install the receiver and connect the Parameters
1. Pull out the receiver. As picture two shows:
2. Pull "ON" to the mouse power switch .As picture three shows:
Receiver
Picture 1
Picture 2
