~
- 12 -
~
3.2 Assemble Diagram
3.2.1 Threading
Insert the external speed sensor connection cable , front light connection cable ,
display connection cable , rear light connection cable , power connection cable
into the bike according to the requirements ;
Insert all above cables into the motor according to ‘’ 3.1.2 system
Connection diagram’’
Finish the cable length and position;
3.2.2 Install the motor
Insert 3pcs Hex Torx sunk sockets M6X65 and 3pcs Hex Torx sunk screws M6*18
into 3 holes of the frame connecting plate as shown in the picture, and lock
them(locking torque: 8-10Nm);
3.2.3 Install left and right plastic housing
Clamp the left and right plastic housings onto the motor; Lock 8pcs M4X8 Hex
Torx pan screws as shown in the picture(locking torque: <1Nm);
