14
13
FRONT PANEL FUNCTION
BACK PANEL FUNCTION
LOUD INDICATOR LIGHT
When the loud button is pressed, the indicator light is on;
when reset, the indicator light is off
1
REMOTE CONTROL RECEIVER
Receive the infrared remote control command signal sent by the
remote control.
3
INPUT
This knob is for input selection of six different audio signals. The
selected audio signal indicator lights up accordingly.
2
LOUD
When listening at a low volume, press this button to compensate
for the loudness of high and low sounds, but when the volume is
turned to more than half, the effect gradually decreases.
4
SIGNAL INPUT INDICATOR
S1/USB
、
S2/OPTICAL
、
S3/COAXIAL
7
POWER
This button is used to turn on or off the AC power supply of the
whole machine.
8
SIGNAL INPUT INDICATOR
S4
、
S5
、
S6
9
VOLUME
This knob is used as a volume control; it increases when turned
to the right, and decreases when turned to the left.
There is a red indicator light on the knob, which flashes when it is
turned on, and goes out after about 15 seconds, indicating that
the machine enters the working state; in the remote control
volume control, the light follows; in the silent mode, the light
flashes.
5
INPUT GAIN INDICATOR LIGHT
The user can select the 0dB or -8dB gear according to the output
level of the audio source through the GAIN button on the remote
control; when the indicator light is on, it means the gain gear is
-8dB, when the indicator light is off, it means the gain is 0dB gear.
(
This function is only suitable for the use of the signal source
output level higher than 2.5V. When the signal source output level
is within 2.5V, the 0dB gear should be selected.
)
6
7 8 9
5
2 3 4
6
1
ANALOG AUDIO INPUT TERMINAL
This terminal is used to connect the analog audio signal source output
terminal.
(
a total of three input terminals are provided,among which "S4 ~
S5" are RCA inputs, and"S6"are XLR inputs
)
.
1
AUDIO OUTPUT TERMINAL
This output terminal is connected to the input terminal of the power
amplifier
(
a total of four output terminals are provided, two of which are RCA
outputs and two are XLR outputs
)
.
2
6
POWER SOCKET WITH AC POWER FUSE
This power socket is used to connect to AC power. The fuse is at
the bottom of the power socket. When replacing the fuse, be sure
to unplug the power cord to replace it.
5
USB DIGITAL INPUT TERMINAL
This terminal is used as a USB interface for connecting digital
devices.
(
Computer/Digital player, etc.
)
Note: Apple system and the digital player is free of driver installation, and the window
system needs to go to the download center of Shengya official website to download the
driver and install it.
(
http://www.shengya-audio.com/downloads.html
)
4
OPTICAL DIGITAL INPUT TERMINAL
This terminal is used as an optical interface for connecting digital
equipment.
(
Computer/digital game console/DVD player/HD TV set-top box
)
3
COAXIAL DIGITAL INPUT TERMINAL
This terminal is used as an optical interface for connecting digital
equipment.
(
Computer/digital game console/HD TV set-top box
)
1
2
6
3
5
4