PAGE 2
Side Bend Connectors
(sharp bend)
Top Crest Connectors
(shallow bend)
10042
10244
10244
10244
10244
10244
10244
10244
10244
10244
10244
10244
10244
10244
10244
10244
10042
10046
10048
10045 10047
10042
10042
10042
10042
10042
10042
10042
10042
10042
10042
Assembly is easiest if you layout all parts as
shown. There are (12) #10042 Rafter Poles ,
they are swedged on both ends. The (15)
#10244 Cross Poles do not have swedged
ends. It is very important that you determine
which of the 3 & 4 way connectors are meant
for the sides and which are for the crest.
assembly together as shown in Fig. 1A. Assemble each side of the roof as shown in Fig. 2. Install #802102 truss
brace roof cables as shown in Fig. 2A.
Start with center, Fig. 1, using layout shown in diagram above. Bolt roof
Assemble Roof
Fig. 2
Fig. 1
Note:
Install all carriage bolts
with nut toward center of frame.
10043
01010
10017
Fig. 1A
Place cover over frame so that the
grommeted portion is face down,
this allows the valance to wrap
around and cover the frame eaves.
Insert #10043 Leg Poles on one side of the frame, swedged
end up, then the end legs on that same side. Repeat for the
other side. Now you can secure the legs to the side bend
connectors and secure the cover with bungee cords.
10046
10045
10046
10045
10047
10047
10048
10045
10045
10047
10047
10048
10047
10047
10048
10047
10047
10048
10017
7000
Fig. 2A
802102
1. Frame Assembly
4. Attaching Legs
3. Place Cover
