background image

1

SHELTER OUTDOOR FURNACE MANUAL

MODEL: SF4200

EPA Certified to the Warm Air Furnace NSPS requirements, for sale May 2017 through May 2020.

SAVE THESE INSTRUCTIONS

Congratulations!  You have selected the finest quality outdoor wood burning furnace, manufactured with pride in the USA.  

Please take a few moments to carefully read the owner’s manual.  By taking the time to familiarize yourself with your new 

Shelter Furnace, you will be able to look forward to years of trouble-free, dependable service.

Installation:

 

•   First, check local codes.  The installation must comply with all local rulings and requirements.

 

•   This furnace is an outdoor hot air furnace and must not be altered in any way.

 

•   This furnace requires a back-up electric generator, 2000 watts minimum, in case of power failure.

 

•   Always have a properly installed and functioning smoke detector installed in your home.

 

•   To prevent accidental injury, do not allow anyone who is unfamiliar with the furnace to operate it.

 

•   Spend time familiarizing yourself with your Shelter Furnace, especially the different settings and the   

  

effects they have on burn patterns.  It is impossible to predict how each setting will affect your furnace, due to   

 

  variations in conditions, fuels, and temperatures.

 

•   When making plans to install your outdoor furnace, the first thing you need to think about is the placement of the        

                  unit.  Although you can install the Shelter Furnace up to 30 feet from the home, a much shorter distance is                         

 

     recommended to provide better airflow.  The furnace has been tested for clearance of 12 inches from the home;                      

                  this would give maximum airflow and provide the highest efficiency.

Transportation Damage

Every effort has been made to ensure that your Shelter Furnace will arrive in perfect condition.  Any visible damage should be 

noted on the freight bill at the time of delivery.  If upon unpacking your furnace, you find damage has occurred during transit, 

notify your dealer immediately.  Your dealer will advise you what actions must be taken to correct the problem.

Disclaimer Notice

The listed BTU rating of your new Shelter Furnace was obtained using laboratory calculations. The actual BTU output you 

experience may vary somewhat depending on the type, condition, and moisture content of the fuel used, damper 

adjustment, chimney type and other variables.  Therefore, the manufacturer disclaims any guarantee as to the BTU output 

or capacity of your furnace.  Shelter Furnace disclaims any responsibility for the following: installation of a furnace that has 

been altered or modified in any way; installation of the furnace other than as instructed in this manual; installation and or 

use of any component or part not approved by Shelter Furnace for use on this furnace.  Be sure to complete and return your 

warranty card within 30 days of purchase in order to activate warranty coverage on your furnace.

Manufacturer’s Notice

Please be advised that periodic changes are made to improve the furnaces.  Therefore the information in this manual may not 

be completely applicable to your Shelter Furnace.  Please refer to markings on the appliance for additional information.

THIS IS AN OUTDOOR WOOD BURNING FURNACE ONLY AND SHOULD NOT 

BE ALTERED IN ANY WAY.

Содержание SF4200






























Отзывы: