Shelter Furnace SF3048, Руководство пользователя

Страница: 7 / 30

6
Chimney Pipe and Anchor Plate:
Class “A” HT 2100 All Fuel 6 inch Chimney Pipe is required for optimum performance and must maintain a 2 inch clearance from
combustibles. The Shelter Furnace will ship with an anchor plate and four #10 ¾” galvanized screws with washers and gaskets. If the
anchor plate provided with your furnace does not fit your chimney type, please call our toll free number, 1-800-875-4788 for assistance.
IMPORTANT: Please keep in mind that different chimney manufacturers’ pipe will not interchange with other brands. A tube of high-temp
silicone caulk is included with your furnace. Before using the silicone to install the anchor plate to the top of your Shelter Furnace,
ensure the chimney you purchased will fit the anchor plate.
Guy wire brackets are attached to the sides of the Shelter Furnace. A heavy gauge of stainless steel wire can be purchased from your
store to use as guy wire to help support your chimney. Attach the appropriate chimney pipe lengths to the adaptor plate finishing with a
chimney cap. IMPORTANT: Your furnace requires its own chimney system and cannot share a flue with any other appliance. DO NOT
USE GALVANIZED OR BLACK PIPE TO VENT YOUR FURNACE.
INSTALLING THE ANCHOR PLATE:
IMPORTANT: BEFORE YOU FOLLOW THE NEXT STEPS, ENSURE THE ANCHOR PLATE YOU RECEIVE MATCHES YOUR
CHIMNEY PIPE, AS CHIMNEY PIPE IS NOT GENERIC AND WILL NOT INTERCHANGE.
1. Using the diagram below as a guide, caulk the
bottom of the anchor plate around the center pipe
shaft.
2. Install the anchor plate to the top of your furnace using
four #10 3/4” galvanized screws with rubber gaskets.
3. Install the chimney pipe to your outdoor furnace.
4. After all the chimney components are installed including
the cap, follow the diagram below to caulk around the
chimney pipe as well as around the outer edge of the
anchor plate.
PLACE A LINE OF
1
4
DIA HIGH TEMPERATURE
SILICONE CAULK ON CHIMNEY ADAPTOR AS
SHOWN BY DASHED LINES
Place a line of high temperature caulk (1/4
inch diameter) on the chimney adaptor as
shown with dashed line.