LEGEND
1. Button
2. USB port
3. Reset button
The WiFi battery operated button switch, Shelly But-
ton1 may send commands for control of other devic-
es, over the Internet. You can place it anywhere, and
move it at any time. Shelly may work as a standalone
Device or as an accessory to another home automa-
tion controller.
Specification
Power supply(charger)
*: 1A/5V DC
Complies with EU standards:
•
RE Directive 2014/53/EU
•
LVD 2014/35/EU
•
EMC 2004/108/WE
•
RoHS2 2011/65/UE
Working temperature:
–20°C up to 40°C
Radio signal power:
1mW
Radio protocol:
WiFi 802.11 b/g/n
Frequency:
2400 – 2500 MHz;
Operational range (depending on local construction):
•
up to 30 m outdoors
•
up to 15 m indoors
Dimensions (HxWxL):
45,5 x 45,5 x 17 mm
Electrical consumption:
< 1 W
*Charger not included
Technical Information
•
Control through WiFi from a mobile phone, PC,
automation system or any other Device supporting
HTTP and/or UDP protocol.
•
Microprocessor management.
CAUTION!
When the device is connected to a charger,
it is also constantly active and sends the command
immediately.
CAUTION!
Do not allow children to play with the
button/switch of the Device. Keep the Devices for re-
mote control of Shelly (mobile phones, tablets, PCs)
away from children.
Introduction to Shelly®
Shelly® is a family of innovative Devices, which allow
remote control of electric appliances through mobile
phone, PC or home automation system. Shelly® uses
WiFi to connect to the devices controlling it. They can
be in the same WiFi network or they can use remote
access (through the Internet). Shelly® may work
standalone, without being managed by a home auto-
mation controller, in the local WiFi network, as well
as through a cloud service, from everywhere the User
WiFi
BUTTON SWITCH
USER GUIDE
has Internet access.
Shelly® has an integrated web server, through which
the User may adjust, control and monitor the Device.
Shelly® has two WiFi modes - access Point (AP) and
Client mode (CM). To operate in Client Mode, a WiFi
router must be located within the range of the Device.
Shelly® devices can communicate directly with other
WiFi devices through HTTP protocol.
An API can be provided by the Manufacturer. Shelly®
devices may be available for monitor and control
even if the User is outside the range of the local WiFi
network, as long as the WiFi router is connected to
the Internet. The cloud function could be used, which
is activated through the web server of the Device or
through the settings in the Shelly Cloud mobile ap-
plication.
The User can register and access Shelly Cloud, using
either Android or iOS mobile applications, or any in-
ternet browser and the web site:
https://my.Shelly.cloud/.
Installation Instructions
CAUTION!
Danger of electrocution. Keep the device
away from moisture and any liquids! The device
should not be used in areas with high humidity.
CAUTION!
Danger of electrocution. Even when the
Device is turned off, it is possible to have voltage
across its clamps. Every change in the connection
of the clamps has to be done after ensuring all local
power is powered off/disconnected.
CAUTION!
Before using the device please read the
accompanying documentation carefully and com-
pletely. Failure to follow recommended procedures
could lead to malfunction, danger to your life or vio-
lation of the law. Allterco Robotics is not responsible
for any loss or damage in case of incorrect installa-
tion or operation of this Device.
CAUTION!
Use the Device only with power grid and
appliances which comply with all applicable regula-
tions. short circuit in the power grid or any appliance
connected to the Device may damage the Device.
RECOMMENDATION!
Тhe Device may be connected
(wirelessly) to and may control electric circuits and
appliances. Proceed with caution! Irresponsible atti-
tude could lead to malfunction, danger to your life or
violation of the law.
In order to add the device to your WiFi network, please
connect it to a charger first. Upon connecting it to a
charger, the device will create a WiFi Access Point.
For more information about the Bridge, please visit:
http://shelly-api-docs.shelly.cloud/#shelly-fami-
ly-overview
or contact us at:
developers@shelly.
cloud
You may choose if you want to use Shelly with the
Shelly Cloud mobile application and Shelly Cloud
service. You can also familiarize yourself with the in-
structions for Management and Control through the
embedded Web interface.
Control your home with your voice
All Shelly devices are compatible with Amazon Echo and
Google Home. Please see our step-by-step guide on:
https://shelly.cloud/compatibility/Alexa
https://shelly.cloud/compatibility/Assistant
MOBILE APPLICATION FOR
MANAGMENT OF SHELLY®
Shelly Cloud gives you opportunity to control and ad-
just all Shelly® Devices from anywhere in the world.
You only need an internet connection and our mobile
application, installed on your smartphone or tablet.
To install the application please visit Google Play
(Android - left screenshot) or App Store (iOS - right
screenshot) and install the Shelly Cloud app.
Registration
The first time you load the Shelly Cloud mobile app,
you have to create an account which can manage all
your Shelly® devices.
Forgotten Password
In case you forget or lose your password, just enter
the e-mail address you have used in your registration.
You will then receive instructions to change your
password.
WARNING!
Be careful when you type your e-mail ad-
dress during the registration, as it will be used in case
you forget your password.
First steps
After registering, create your first room (or rooms),
where you are going to add and use your Shelly de-
vices.
Shelly Cloud gives you opportunity to create scenes
for automatic turning on or off of the Devices at pre-
defined hours or based on other parameters like tem
-
perature, humidity, light etc. (with available sensor in
Shelly Cloud). Shelly Cloud allows easy control and
monitoring using a mobile phone, tablet or PC.
Device Inclusion
To add a new Shelly device turn it on and follow the
steps for Device inclusion.
Step 1
After the installation of Shelly following the Instala-
tion Instructions and the power is turned on, Shelly
will create its own WiFi Access Point (AP).
WARNING!
In case the Device has not created its’
own AP Wi-Fi network with SSID like
shellybut-
ton1-35FA58
, please check if the Device is connect-
ed accordingly to the Installation Instructions. If you
still do not see an active Wi-Fi network with SSID like
shellybutton1-35FA58
or you want to add the Device
to another Wi-Fi network, reset the Device. You will
need to remove the back cover of the Device. The
reset button is below the battery. Carefully move the
battery and hold the reset button for 10 seconds.
Shelly should return to AP mode. If not, please repeat
or contact our customer support at
support@Shelly.
cloud
Step 2
Choose “Add Device”.
In order to add more Devices later, use the app menu
at the top right corner of the main screen and click
“Add Device”. Type the name (SSID) and password
for the WiFi network, to which you want to add the
Device.
Step 3
If using iOS:
you will see the following screen:
Press the home button of your iPhone/iPad/iPod.
Open Settings > WiFi and connect to the WiFi network
created by Shelly, e.g.
shellybutton1-35FA58
.
If using Android:
your phone/tablet will automatically
scan and include all new Shelly Devices in the WiFi
network that you are connected to.
Upon successful Device Inclusion to the WiFi network
you will see the following pop-up:
Step 4:
Approximately 30 seconds after discovery of any new
Devices оn the local WiFi network, а list will be dis
-
played by default in the “Discovered Devices” room.
Step 5:
Enter Discovered Devices and choose the Device you
want to include in your account.
1
2
3
www.domotica-shop.nl
www.domotica-shop.nl
