Sheffield PLA1622, Руководство пользователя

Страница: 8 / 10

AFTER SALES SUPPORT Distributed By Prolink Brands Ltd
Email: service@prolinkbrands.co.nz P.O Box 132 398 Sylvia Park
Phone: 0508 776 546
Auckland 1644, New Zealand
Page 7
ASSEMBLY AND PARTS
1. Silicon stopper
2. Water tank
3. Compressor
4. Plug and power cord
5. Front lid
6. Viewing window
7. Back cover
8. Control Panel
9. Water tray
10. Evaporator
11. Ice shovel
12. Ice basket
Before First Use
1. During transportation, the angle of the cabinet should not be tilted over 45°. Do
not turn the Ice maker upside down. As this may damage the compressor and
sealed system.
2. Remove all packing material and carefully check your ice maker to ensure it is in
good condition and that there is no damage to the ice maker or power cord and
plug.
3. The Ice maker should be placed on a flat, level surface. To ensure proper
ventilation for your Ice maker allow 150mm of space at the top, the back and on
each side. Do not install the Ice maker near an oven, radiator, or any other heat
source.
4. Before using the Ice maker for the first time, please wait 2 hours after positioning
it, and keep the front lid open for at least 2hours.
5. Pure water is not allowed to be used in this unit, spring water is recommended.