Version 0.8
5
Copyright © 2022
23.06.2022
Shearwell Data Ltd
2 Installation
The Shearwell X6 reader is designed to be affixed to a Handheld Nautiz X6, via
two screws located either side of the connection pins on the lower part of the
casing. The casing must be opened in order to access these screws.
1.
Locate and remove the six 2.2x5 pan
head screws in the protective casing
of the reader
(6)
. Carefully separate
the two parts, taking care not to
dislodge the screws from the casing,
as these are not fixed.
2.
The circuit board should now be
visible. There are two M2x6 screws
(8)
and two M1.6x12 screws (
7
) that
are fixed directly through the board;
these should be loosened slightly to
allow ease of installation.
3.
Align these four screws, along with
the gold pins on the bottom of the
reader, with the port and screw
threads on the back of the Handheld X6 device.
4.
Screw the reader onto the back of the Handheld X6 device, taking care
not to overtighten the screws as this can damage the circuit board.
Make sure that the screwdriver does not slip and impact with the board.
5.
Carefully replace the top cover of the reader, refixing with the six
M2.2x5 pan head screws.
The Shearwell X6 reader is now installed on the Handheld Nautiz X6 device. It
is designed to work seamlessly with the Stock Recorder App.
CAUTION
-
To attach the Shearwell X6 Reader, please follow
these instructions carefully. Failure to do so could result in
irreparable damage to the circuitry.
Shearwell Data Limited is not responsible for any damages
caused by the user during installation.
