6
7.0 AcuLoop Specification
8.0 Guarantee
All Shaw Moisture Meters products are guaranteed for two years from the date
of purchase, some exclusions are as follows: removing protective guard from any
sensor, subjecting sensor to shock or black list gases e.g. caustic and acidic gases like
ammonia and chlorine, tampering with any internal electronics and applying incorrect
supply voltage to meters, subjecting to excessive flow rate, contaminants and general
misuse.
If you suspect a fault which you feel needs to be attended to under guarantee please
contact us for assistance hopefully to help fault find and effect a remedy and if this is
not successful to give precise instructions for the return for inspection.
No equipment will be replaced or repaired without having been returned for
inspection either to ourselves or an authorised distributor.
Electromagnetic
Compatibility (EMC):
Immunity: complies with EN 61000-6-1:2001
Emissions: complies with EN 61000-6-3:2000
Display:
Four digit LED (height 9.2 mm)
Display Accuracy:
0.2% F.S.
Voltage Drop:
3.3 V DC
Overload Current:
40 mA DC
Power Supply:
4-20 mA, 2-wire loop power
Output Signal:
4-20 mA Linear
Operating Voltage:
7 - 24 V DC reverse polarity protected
Operating Temperature:
-20 °C to +75 °C
Rotating Angle:
210°
Dimensions:
66 mm (w) x 79.75 mm (d) x 64.77 mm (h)
Weight:
125 g
Weatherproof
Classification:
IP65
Connections:
M12 connector
Mechanical Warranty:
24 months in case of faulty workmanship and defective
parts
