16
12.
Pressure Threshold Setting (default level 2).
Press the
SET(MODE)
key again to
change the pressure threshold. Press the [+] key or [
-
] key to change pressure threshold
2 mbar/hour to 4 mbar/hour.(For detailed information of this part please refer to 9.5)
13.
Weather Icons Setting (default: partly cloudy).
Press the
SET
key again to change
the initial weather icon. Press the [+] key or [
-
] key to select the initial weather icon of
Sunny, Cloudy, Partly Cloudy or Rainy. (For detailed information of this part please
refer to 9.1 and 9.2)
14.
Sunlight Display Units(default: W/
㎡
)
. Press the
SET
key again to change the
sunlight units of measure. Press the [+] key or [
-
] key to toggle the sunlight units
between ,
W/
㎡,
fc
or lux.
15.
Location division.(default: Northern Hemisphere)
.Press the SET(MODE) key again
to change the location division. Press the [+] key or [-] key to toggle the sunlight units
Northern Hemisphere (NOR)or Southern Hemisphere(SOU).(refer to 5.0 Final
Installation of Integrated outdoor transmitter)
7.3
Sensor
Search
Mode
If Outdoor sensor loses communication, dashes (--.-) will be displayed.
To reacquire the lost signal, press and hold the
CH/+
button for 3 seconds to enter the
sensor search mode.
7.4
Reset
Min/Max
record
Note:
The minimum and maximum value of all channels will be cleared in the reset
mode.
In normal mode, press (do not hold) the
MIN/MAX/-
key
,
the
MAX
icon will be displayed
in UV INDEX area. Press the
SET
key to view max values of rainfall (rate, 24h, week or
month) , OUT or Indoor temperature and humidity ,outdoor temperature and humidity(AT
or dew point).
Press the
MIN/MAX/-
key for three seconds(and the
CLR
character is flashing in time
area) to clear all max values. the rainfall, wind speed, wind gust, Out and indoor
temperature and humidity maximum values. The maximum values will now display the
current values
）
.
Press the
MIN/MAX/-
key again (do not hold), the
MIN
icon will be displayed. Press the
SET
key to view min values of out/indoor temperature/humidity and outdoor (AT or dew
point)
Press the
MIN/MAX/-
key for three seconds(and the
CLR
character is flashing in time
area) to clear all min values.(Indoor and out temperature and humidity minimum values.
The minimum values will now display the current values).
Press the
SNOOZE
key to exit the min/max checking and cleaning mode, return to normal
display mode.
7.6 Snooze Mode
If the alarm sounds, and you wish to silence the alarm, press the
SNOOZE
key, the
backlight will turn on. The alarm icon will continue to flash and the alarm will silence for
