Direction
Drone View
Instructions
Controller View
If it drifts to the LEFT…
Press the Aileron trim button
(right side button) until the
drone stops drifting.
If it drifts to the RIGHT…
Press the Aileron trim button
(left side button) until the drone
stops drifting.
If it drifts BACKWARD...
Press the Forward/Backward
Trim Button UP till the drone
stops flying backwards.
If it drifts FORWARD…
Press the Forward/Backward
Trim Button Down till the drone
stops flying forwards.
- 5 -
It may be necessary to adjust the trim (fine tune the controls) before a flight. When you
lift off your Mosquito Drone into the air, and don’t use any other control levers, it should
just hover in one spot. If it doesn’t, you can follow the instructions below to bring your
drone to a perfect hover.
TRIMMING YOUR MOSQUITO DRONE
Sometimes you will want to reset the Mosquito Drone back to its original factory trim
settings. There are two ways to do this.
RESETTING THE TRIM
