TECHNICAL SPECIFICATIONS
Transmission mode
: UHF Stereo
Carrier frequency
: 900MHz
Operating voltage
: Transmitter : 8V 400mA
Receiver : 3.7 V, 350 mA Lithium Polymer Battery
Frequency response
: 30 Hz – 15 KHz
Distortion
: <1%
Signal-to-noise ratio
: >60 dB
Range
: Up to 30 meters (open area)
Working Time : 6 Hours
TROUBLESHOOTING
NO SOUND
-
Ensure that the mains adapter is pushed fully into the power outlet and
that its cable is properly connected to the DC IN connector on the
transmitter.
-
Ensure that the Headset Receiver Power ON/OFF switch is switched to
ON.
-
The charge level of Battery inside Headset Receiver may be too low.
Recharge the battery.
-
Ensure that the TV set, Hi-Fi system or audio component is switched
ON and set to a channel that broadcasts an audio signal.
-
Use the Volume Control on the Headset Receiver to increase the sound
level.
-
The connected audio/video equipment may not be in playback mode.
Start playback on by the equipment.
-
The Headset Receiver output level is set too low. Adjust the volume to
a suitable level.
DISTORTION
-
The charge level of Battery inside Headset Receiver may be too low.
Recharge the battery.
-
The Headset Receiver may be too far away from the Transmitter. Move
closer to it.
-
The Audio Signal input level is too low. Increase the volume from the
audio source.