background image

3

LED Display Board

The LED Display Board is located in the middle of the Hover Board. 
• Green LED light = battery fully charged.  
• Red LED light = power is down to 20% or less. 

NOTE: When the LED light becomes red, please stop riding and recharge the battery.

LED Running Lights 

• When the operator triggers the pedal switches, the LED Running Lights will illuminate.  

RANGE

• The Hover Board is designed to travel up to 12 miles on a full charge.
• A smooth, flat surface will increase the range. 
•  Riding and storing the Hover Board at recommended temperatures will increase the range.
• Reasonable battery charging and maintenance will increase the range.
• Maintaining a moderate speed will increase range.
• Frequent starts, stops, acceleration and deceleration will decrease the range.
• Continued driving under low power will negatively affect battery life.

NOTE: Other factors may affect the Hover Board’s range, including weight of the operator, the 
temperature and surface conditions. 

SPEED 

• Your Hover Board maximum speed is approximately 6-10 m.p.h.
•  When the speed approaches the maximum, a beeping alarm will sound and the Hover Board  

will tilt itself up automatically to slow down.  

GETTING STARTED

• Always check the battery level before operating the Hover Board. 
•  Charge the Hover Board fully prior to first use. Normal charging time is approximately 130 minutes 

for a full charge, 90 minutes for 80% charge.  

• The best charging temperature is between 32°F and 100°F.
• Dress in casual clothes and flat shoes.
• Start slow and avoid driving in narrow or crowded places at first.  
•  Practice in an open area until you can get on and off the vehicle, and move it forward, backward, 

left, right and stop. 

• The Hover Board is designed to be a personal transport, driven on flat ground.
•  During operation, if there is a system error or illegal operation, the Hover Board will prompt  

the driver. 

Отзывы: