A501/A551
Rev. C 3/13
8
Set-Up and Operation
Setting Up the Unit
Unpack the unit and make sure that any and all tape and protective
wrap is removed from the unit.
IMPORTANT:
REMOVE AND DISCARD THE FOAM-PACKING BLOCK
FROM UNDER THE FILTER DOOR.
Place the unit on a level floor, keeping it a minimum of 24” (60cm)
away from any walls, furniture or appliances. Position the unit so that
the clean air flows towards your desired area.
IMPORTANT:
ENSURE THAT THE AIR INTAKE GRILL AND AIR EXIT
GRILL ARE NOT BLOCKED.
Operating the Unit
1. Plug the power cord into an energized electrical wall outlet.
2. Press the Power Button to turn the unit on. The Power Button will
illuminate when on.
3. Select your desired fan speed by rotating the Variable Speed
Control until you reach your ideal speed.
4. Press the Power Button again to turn the unit off.
Be sure that the plug fits tightly into an outlet.
When plugs fit loosely into receptacles, they may slip
partially or completely out of the receptacle with only
slight movement of the attached cord. Receptacles in this
condition may overheat and pose a serious fire hazard; if
covered by a curtain or drape, the fire hazard is even greater.
