(INSERT TOWEL WARMER IMAGE AND CALLOUTS)
BEFORE USING THE
TOWEL WARMER
1. Open the cover and remove any contents.
2. Place the Towel Warmer on a dry, level hard surface.
OPERATING THE TOWEL WARMER
SELECTING A TOWEL
Your Towel Warmer will warm two standard-size bath towels. For best results,
use 100% cotton or cotton-blend towels.
1. Plug the power cord into a standard 120V AC outlet.
2. Open the lid and place your towel(s) inside.
3. Close the lid and switch the power button on the top of the unit to ON.
The RED indicator light will illuminate, indicating the unit is warming
your towel(s).
NOTE: When RED indicator light is illuminated, inside surfaces of
Towel Warmer are hot to the touch. Handle Towel Warmer carefully
when RED light is illuminated.
4. When the GREEN indicator light illuminates, your towels are ready for use.
5. After 50 minutes the GREEN indicator light will turn off, meaning the
internal heater has automatically shut off. You may use your towel at this time
or leave your towel in the warmer to maintain its heat.
6. To use the Towel Warmer again, switch the power button on top of the
warmer to ON. (You must press the OFF button first)
NOTE: The RED indicator light must be off, and the Towel Warmer
cooled down before additional towels can be heated.
CARE AND MAINTENANCE
CLEANING
• Your appliance is maintenance free.
• If cleaning becomes necessary, disconnect the appliance from the wall outlet
and wipe with a soft, dry cloth. Do not use any strong chemical cleaners such
as benzine.
STORAGE
• Unplug the unit when not in use.
• Allow the unit to cool; store out of reach in a safe, dry location.
• Handle power cord carefully to prolong its life. Firmly grasp plug when
removing from outlet. Do not pull plug from outlet using the cord.
