• Before applying the unit to the skin, make sure to clean the
desired area beforehand. To clean skin, simply wet a towel or
napkin with rubbing alcohol and gently wipe the area.
• It is recommended to remove excess hair from the desired
workout area in order to maximize product lifespan.
• Do not apply lotions or oils before using the device as this will
prevent the gel pad from sticking to the skin.
• When done with your workout session, make sure to place the
unit onto the protective plastic sheet.
• Only use the provided plastic sheet for storing the product
and gel pads. This plastic sheet is designed to maximize the
lifespan of the gel pads.
• The lifespan of the gel pads will vary depending on the
use frequency and care taken. Keeping gel pads clean and
stored properly on the provided plastic sheet will extend
their lifespan. Replace the gel pads when they lose their
adhesiveness.
GEL PAD MAINTENANCE
PULSE MODES
(continued)
Hold down the + button for 3 seconds to change the mode.
Successful mode change will be indicated by the LED light
flashing twice and two audible beeps.
1.
Mode 1(EMS):
Stimulation of healthy muscles in order to
improve and facilitate muscle performance
2.
Mode 2 (TENS):
Relief of pain associated with sore and
aching muscles due to strain from exercise or work activities
3.
Mode 3 (EMS):
Visible muscle contraction seen for
improving muscle performance
4.
Mode 4 (TENS):
Deeper relief of pain associated with sore
and aching muscles due to strain from exercise or work
activities
5.
Mode 5 (EMS and TENS):
Combination of the benefit from
both EMS and TENS
