- 4 -
ALARM AND SNOOZE (CONT.)
DAYLIGHT SAVINGS TIME (DST) MODE
SELECTING FAHRENHEIT OR CELSIUS
INDOOR TEMPERATURE
OUTDOOR TEMPERATURE
• 3 Beeps for 21-30 seconds.
• Constant beeps for 31-120 seconds
• While the alarm is beeping, the alarm icon will flash.
• While the alarm is beeping, press the “SNZ / LIGHT” to active snooze. The alarm will snooze”
for 10 minutes, then resume beeping.
• To turn the alarm off, press any key OTHER THAN “SNZ / LIGHT” to return to normal time mode.
• Most states observe Daylight Savings Time.
• To turn DST on or off, hold the “MODE” button into setting mode. You will see “EST” flashing.
Press “MODE” again. You will see “ON” flashing. The “ON” means DST function is on.
Press “UP” or “DOWN” to turn off the DST.
• When DST is on, this unit will update the time automatically to comply with Daylight Savings
Time.
• The default temperature unit is degrees Fahrenheit (°F).
• To switch to Celsius, press and hold the “MODE” button. You will see “EST” flashing.
• Press the “MODE” button 9 more times to scroll through the other settings. You will see °F flashing.
• Press “UP” or “DOWN” to switch from Fahrenheit to Celsius.
• Press “MODE” to confirm your selection and exit.
• The indoor temperature range is 0 °C / 32 °F to 50 °C / 122 °F.
• Testing cycle: 30 seconds
• Temperature reso/- 2 °F
• If the current temperature exceeds the maximum temperature, the device will display
the maximum temperature.
• If the current temperature is below the minimum temperature, the device will display
the minimum temperature.
• The outdoor temperature range is -30 °C / -32 °F ~ +60 °C / 140 °F
• Temperature reso/- 2 °F
• If the current temperature exceeds the maximum temperature, the device will display
the maximum temperature.
• If the current temperature is below the minimum temperature, the device will display
the minimum temperature.
