- 3 -
Note: If pliers are needed to tighten the
showerhead, place a soft cloth between
the pliers and the showerhead connector
to prevent marring. Plumbing tape
should be applied to the threads of this
connection to keep from leaking.
6. Spin mirror to select side. Select the 1X
or 3X magnified mirror side by spinning
the mirror frame.
Note: The mirror frame will NOT spin
endlessly. The mirror frame will spin
360-degress and then stop. Reverse the
spin of the mirror to select opposite side.
7. Assemble razor hanger. Insert razor
hanger into one of the frame slot hole
on either side of the mirror—as shown.
Slide razor hanger in frame slot so that it
comes to rest at the bottom of the mirror.
CLEANING INSTRUCTIONS
• Keep water droplets from spotting the
surface by wiping the mirror and frame
dry with a soft towel after each use.
• Clean with only nonabrasive, liquid glass
cleaner and a soft cloth.
• Never use abrasive cleaners as they
will scratch the mirror glass and frame
surface.
• With any cleaner, it is always a good idea
to test a small area before cleaning entire
surface.
• Do not use paper towels to clean with—
they can be abrasive and leave scratches
in the chrome surface. Use only a soft,
clean towel or cloth.
WARNING
Do not use paper towels to clean with—they
can be abrasive and leave scratches in the
chrome surface. Use only a soft, clean towel
or cloth.
WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased
from SharperImage.com include a
1-year limited replacement warranty.
If you have any questions not covered
in this guide, please call our Customer
Service department at 1 (877) 210-3449.
Customer Service agents are available
Monday through Friday, 9:00 a.m. to 6:00
p.m. ET.
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
