CONNECTING THE UNIT TO POWER
Plug AC power cord to the AC wall outlet. Before switching on the unit, make sure that the voltage of
your electricity supply is the same as that indicated on the rating plate.
BATTERY BACKUP
Insert two pieces UM-4 batteries into the battery compartment. Be sure to observe the proper polarity
(the "+" and "-" signs) as indicated inside the battery compartment.
In case of power failure or interrupted AC power, the current time and alarm time settings, the stored
radio stations are preserved in the memory of the unit by means of battery back-up function.
SETTING THE CLOCK
1.
With the unit in CLOCK mode, press and hold the CLK/MEM button for about 1 second, the time
will begin to flash on the LED display.
2.
Press the
/
HR
button to adjust the
hour.
3.
Press the
/
MIN
HR
MIN
button to adjust the
minute.
hour.
minute.
4.
When the correct time is selected, press the CLK/MEM button again to confirm.
SETTING THE ALARMS
1.
With the unit in CLOCK mode, press the ALM1/VOL
+
or ALM2/VOL button. The ALARM time
will begin to flash on the LED display.
2.
Press the
/
button to adjust the alarm
3.
Press the
/
button to adjust the alarm
4.
When the correct time is selected, press the ALM1/VOL
+
or ALM2/VOL button to confirm.
5.
Press the ALM1/VOL
+
or ALM2/VOL button to select the ALARM sound mode - Buzzer Mode,
currently set radio station or Nature Sound Mode. The alarm Buzzer or Radio or Nature Sound
indicator will light up accordingly.
Note: You can select the Nature Sound for the alarm sound. Hold NATURE SOUND SELECT
Button until the display shows
. Press the button repeatedly to select 20 different
Nature
SNOOZE FUNCTION
1. Whenever the alarm (buzzer or radio or nature sound) activates, it can be temporarily suspended
for a short period of 9 minutes by pressing the SNOOZE/SLEEP button once.
2. The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE period has
ended.
3. This procedure can be repeated for up to approximately one hour.
TURN OFF THE ALARM
When the Alarm activate, press the ALM OFF/SOURCE button to turn off the Alarm.
LISTENING TO THE NATURE SOUND
1.
Press the ALM OFF/SOURCE button to select the Nature Sound mode (
).
2.
Press NATURE SOUND SELECT Button repeatedly to select 20 different Nature Sounds. For
example,
means the first Nature Sound,
means the twentieth Sound and
means all the nature sound.
- 6 -
LISTENING TO THE AM/FM RADIO
1.
Press the ALM OFF/SOURCE button to select the FM or AM mode.
2.
Press the
/
button or
/
button step by step to tune to the desired radio stations.
3.
Press and hold the
/
button or
/
buttons for approx. 1 second, it will start to search
the next radio station in the direction of the search. The search operation simply finds stations
with strong signals. Stations with weak reception can only be tuned in manually.
ANTENNA
For best reception, fully extend the FM wire antenna to receive FM stations. For AM reception, the
unit has a built-in antenna, turn the whole unit for best reception.
SAVING A RADIO STATION TO THE MEMORY
1.
Tune the radio to the desired station.
2.
Press and hold the CLK/MEM button for approx. 1 second, the LED display will show P01 and
flash, the radio station will stored in the memory..
3.
Up to 10 AM and 10 FM radio stations can be stored in the memory.
TO LISTEN TO A SAVED RADIO STATION
1.
Press the ALM OFF/SOURCE button to select FM or AM model
2.
Press the CLK/MEM button to select the stored radio station.
SLEEP TO MUSIC FUNCTION
1.
This function allows you to listen to the radio while you fall asleep.
2.
Press the SNOOZE/SLEEP button, the display will show the default sleep time of 90 minutes
3.
Press the SLEEP button again to adjust the desired sleep time.
4.
The options are 90-80-70-60-50-40-30-20-10-min. or OFF
5.
Now you can enjoy listening to the radio for the pre-set period of sleep time.
6.
After this pre-set time has elapsed, the unit will switch off automatically.
AUX IN CONNECTION
1.
Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out
jack or phones jack on your MP3 player or audio device and the other side to the aux-in jack on
the unit.
2.
Press the ALM OFF/SOURCE button to select AUX mode, AUX will display in the LED display
for a few seconds.
3.
Turn on your MP3 player and follow the playback instruction.
4.
To stop this function, simply turned off your MP3 player.
SPECIFICATIONS
Frequency Range:
AM 520 - 1710 KHz
FM 87.5
108 MHz
Power Supply:
AC 120V ~ 60 Hz
Back-Up Battery:
2 pc. UM4 AAA size (Not included)
Specifications are subject to change without prior notice.
- 7 -
Sounds. For example,
01 means the first Nature Sound,
20 means the
twentieth Sound and
means all the nature sound.
MIN
MIN
HR
HR