CLEANING THE MINI SHAVER AND BEARD/MOUSTACHE TRIMMER
1. Thoroughly brush and blow any visible hair from the blades.
2. Remove the Shaver Housing by holding the unit with the trimmer side up
and the blade pointed away from you. Place your thumb on the silver part
of the Mini Shaver and gently press away from you. The Housing will pop
off for cleaning. Note: You may rinse the Shaver Housing with water. Do
not let water drain into the motor area.
3. To maintain your shaver in peak condition, the blades should be oiled
every few haircuts. Do not use hair oil,grease,oil mixed with kerosene or
any solvent. As the solvent will evaporate and leave the thick oil which may
slow down the blades motion.
4. Allow the Shaver Housing to dry and replace it on the unit.
5. Do not allow water to drain in the trimmer`s motor area.
TROUBLESHOOTING
If the cutters do not move, the cutting areas may be clogged or dirty. Clean
the blades and make sure you have a fresh set of batteries installed.
WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a
1-year limited replacement warranty. If you have any questions not covered
in this guide, please call our Customer Service department at 1 (877) 210-
3449. Customer Service agents are available Monday through Friday, 9:00
a.m. to 6:00 p.m. ET.
- 3 -
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
