Sharp XV-Z17000, Руководство по эксплуатации

Страница: 71 / 82

Appendix
-69
Control Contents Command Parameter
Return
Power ON
Standby mode
(or 30-second startup time)
S-VIDEO INPUT Picture Mode Standard V A P S _ _ _ 1 OK or ERR ERR
Natural V A P S _ _ _ 2 OK or ERR ERR
Dynamic V A P S _ _ _ 3 OK or ERR ERR
Movie1 V A P S _ _ _ 4 OK or ERR ERR
Movie2 V A P S _ _ _ 5 OK or ERR ERR
Game V A P S _ _ _ 6 OK or ERR ERR
Contrast -30 - +30 V A P I _ * * * OK or ERR ERR
Bright -30 - +30 V A B R _ * * * OK or ERR ERR
Color -30 - +30 V A C O _ * * *
OK or ERR ERR
Tint -30 - +30 V A T I _ * * *
OK or ERR ERR
Sharp -30 - +30 V A S H _ * * *
OK or ERR ERR
Red -30 - +30 V A R D _ * * *
OK or ERR ERR
Blue -30 - +30 V A B E _ * * *
OK or ERR ERR
CLR Temp -2 - +2 V A C T _ _ * *
OK or ERR ERR
Picture Reset V A R E _ _ _ 1
OK or ERR ERR
VIDEO INPUT Picture Mode Standard V B P S _ _ _ 1 OK or ERR ERR
Natural V B P S _ _ _ 2 OK or ERR ERR
Dynamic V B P S _ _ _ 3 OK or ERR ERR
Movie1 V B P S _ _ _ 4 OK or ERR ERR
Movie2 V B P S _ _ _ 5 OK or ERR ERR
Game V B P S _ _ _ 6 OK or ERR ERR
Contrast -30 - +30 V B P I _ * * * OK or ERR ERR
Bright -30 - +30 V B B R _ * * * OK or ERR ERR
Color -30 - +30 V B C O _ * * * OK or ERR ERR
Tint -30 - +30 V B T I _ * * *
OK or ERR ERR
Sharp -30 - +30 V B S H _ * * *
OK or ERR ERR
Red -30 - +30 V B R D _ * * *
OK or ERR ERR
Blue -30 - +30 V B B E _ * * *
OK or ERR ERR
CLR Temp -2 - +2 V B C T _ _ * *
OK or ERR ERR
Picture Reset V B R E _ _ _ 1
OK or ERR ERR
RGB Frequency Check Horizontal T F R Q _ _ _ 1 kHz (***.* or ERR) ERR
Vertical T F R Q _ _ _ 2 Hz (***.* or ERR) ERR
3D On 3 D E N _ _ _ 1 OK or ERR ERR
Off 3 D E N _ _ _ 0 OK or ERR ERR
3D Format Auto 3 D F M _ _ _ 0 OK or ERR ERR
Side By Side 3 D F M _ _ _ 1 OK or ERR ERR
Top And Bottom 3 D F M _ _ _ 2 OK or ERR ERR
Invert 3 D I V _ _ _ 1 OK or ERR ERR
Lamp Timer Reset *2 L P R E 0 0 0 1 ERR OK, ERR
Note
• If an underbar (_) appears in the parameter column, enter a space. If an asterisk (*) appears, enter a value
in the range indicated in brackets under Control Contents.
*1 For setting the projector name, send the commands in order of PJN1, PJN2 and PJN3.
*2 The Lamp Timer Reset command can only be sent in standby mode.
XV-Z17000̲E̲US.indb 69 XV-Z17000̲E̲US.indb 69 2010/12/17 11:16:49 2010/12/17 11:16:49