Sharp XV-Z12000 - Vision - DLP Projector, Руководство по эксплуатации

Страница: 23 / 98

-22
Connecting the Projector to a Computer
Optional
accessory
DVI to 15-pin D-sub adaptor
Type: AN-A1DV (7.9" (20 cm))
Connecting to a Computer
Using the DVI to 15-pin
D-sub Adaptor and the
RGB Cable (INPUT 5)
1
Connect a DVI to 15-pin D-sub
adaptor to the projector.
2
Connect the above adaptor to
an RGB cable.
3
Connect the above cable to the
computer.
•
Secure the connectors by tightening the
thumbscrews.
Note
•
See “Computer Compatibility Chart” on
page
88 for a list of computer signals
compatible with the projector. Use with
computer signals other than those listed
may cause some of the functions not to
work.
•
When connecting the projector to a com-
puter in this way, select “A. RGB” for “Sig-
nal Type” in the “Options” menu, or select
the “A. RGB” by pressing
on the re-
mote control. See page 69 .
•
A Macintosh adaptor may be required for
use with some Macintosh computers.
Contact your nearest Authorized
SharpVision Service Center or Dealer.
•
Depending on the computer you are us-
ing, an image may not be projected un-
less the signal output setting of the com-
puter is switched to the external output.
Refer to the computer operation manual
for switching the computer signal output
settings.
To RGB output terminal
Notebook computer
RGB Cable
(commercially available)
DVI to 15-pin D-sub adaptor
(sold separately)
-22
Connecting the Projector to Other Devices
To INPUT 5 terminal
XV_Z12000_E_US_p15_26.p65 03.9.26, 6:37 PM 22