Sharp XV-Z10000, Руководство по обслуживанию

Страница: 3 / 178

3
XV-Z10000
Specifications
Projector
XV-Z10000
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM
DTV480
I /DTV480P/DTV720P/DTV1080 I
DLP chip, RGB optical shutter method
Panel size: 0.8"
Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments
Drive method: Digital Light Processing (DLP™)
No. of dots: 921,600 dots (1,280 [H] X 720 [V])
1—1.35 X zoom lens, F3.8, f = 32.5— 44.0 mm
270 W SHP lamp
4-pin Mini DIN connector (INPUT 3)
Y (luminance signal): 1.0 Vp-p, sync negative, 75
Ω
terminated
C (chrominance signal): Burst 0.286 Vp-p, 75
Ω
terminated
RCA Connector (INPUT 1, 2)
Y: 1.0 Vp-p, sync negative, 75
Ω
terminated
P
B
: 0.7 Vp-p, 75
Ω
terminated
P
R
: 0.7 Vp-p, 75
Ω
terminated
520 TV lines (NTSC 3.58 input), 750 TV lines (DTV 720P input)
DVI-I terminal: (INPUT 5)/RCA connector: INPUT 1/2
<Digital>
Input impedance
50
Ω
Input level 250-1000mV
<Analog>
Input Impedance
75
Ω
Input level 0.7Vp-p
<Synchronization signal>
• Separate sync / Composite sync
Input level TTL level
Input impedance 1K
Ω
• Green on sync
Input level (Synchronizing input) 0.286Vp-p
Input Impedance 75
Ω
RCA Connector: V IDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75
Ω
terminated
9-pin D-sub connector (RS-232C Port)
12—120 MHz
43—100 Hz
15—81 kHz
AC 100—240 V
3.7 A (When using AC100V)
50/60 Hz
365 W
About 0.1 W (When using 100 V)
1,400 BTU/hour
+5
°
C to +35
°
C
—20
°
C to +60
°
C
Plastic
38 kHz
475 (W) X 178 (H) X 406 (D) mm (main body only)
475 (W) X 178 (H) X 496 (D) mm (including terminal cover)
9.4 kg
Remote control, Two AA size batteries, Power cord (3.6 m), DVI to 15-pin D-sub adaptor, 21-
pin RCA conversion adaptor, Video cable,Terminal cover, Lens cap (attached), SharpVision
Manager Software CD-ROM, Projector operation manual, SharpVision Manager operation
manual
Lamp unit (Lamp/cage module) (BQC-XVZ100001), Remote control (RRMCGA128WJSA),
AA size batteries , Power cord (QACCVA002WJZZ, QACCBA012WJPZ, QACCL3022CEZZ),
DVI to 15-pin D-sub adaptor (QCNWGA010WJZZ), 21-pin RCA conversion adaptor
(QSOCZ0361CEZZ), Video cable (QCNWGA001WJZZ), Lens cap (PCAPH1056CESA),
Terminal cover (CCOVA 1985CE02), SharpVision Manager Software CD-ROM
(UDSKAA019WJZZ), Projector operation manuals; for European 7 languages (TINS-
A442WJZZ (this manual)) / for Chinese, Korean and Arabic (TINS-A443WJZZ), SharpVision
Manager operation manual (TINS-A452WJZZ)
Product type
Model
Video system
Display method
DLP panel
Lens
Projection lamp
S-video input signal
Component input signal
Horizontal resolution
RGB input signal
Video input signal
Computer control signal
Pixel clock
Vertical frequency
Horizontal frequency
Rated voltage
Input current
Rated frequency
Power consumption (normal)
Power consumption(standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
This SHARP projector uses a DMD Chip. This very sophis-
ticated panel contains 921,600 pixels. As with any high tech-
nology electronic equipment such as large screen TVs, video
systems and video cameras, there are certain acceptable
tolerances that the equipment must conform to. This unit has some inactive pixels within acceptable toler-
ances which may result in inactive dots on the picture screen.
This will not affect the picture quality or the life expectancy
of the unit.
Specifications are subject to change without notice.