manualshive.com logo in svg

Sharp XV-Z10000, Руководство по эксплуатации

Поделиться
Скачать
Sharp XV-Z10000 Скачать руководство пользователя страница 77

Appendix

-75

Info

•

If the temperature warning indicator illuminates, and the power turns off, follow the above possible solutions
and then wait until the projector has cooled down completely before plugging in the power cord and  turning
the power back on. (At least 5 minutes.)

•

If the power is turned off and then turned on again, as during a brief test, the lamp replacement indicator may
be triggered, preventing the power from going on. Should this occur, take the power cord out of the wall outlet
and plug it back in again.

•

If you want to clean the air vents during projector operation, be sure to first press 

. Make sure the power

has turned off and the cooling fan has stopped, then clean the vents.

•

Do not unplug the power cord after the power has been turned off and while the cooling fan is running. The
cooling fan runs for about 90 seconds.

Содержание XV-Z10000
































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды