Sharp XR-32S - Notevision SVGA DLP Projector Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 73

background image

2

INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the operation manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

U.S.A. ONLY

U.S.A. ONLY

Declaration of conformity

SHARP PROJECTOR, MODEL XR-32X/XR-32S
This device complies with Part 15 of the FCC rules. Operation is subject to the following
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

Responsible Party:

SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP (1-800-237-4277)

U.S.A. ONLY

This SHARP projector uses a DLP

®

chip. This very sophisticated panel contains 786,432 (XR-

32X)/480,000 (XR-32S) pixels (micromirrors). As with any high technology electronic equipment
such as large screen TVs, video systems and video cameras, there are certain acceptable
tolerances that the equipment must conform to.
This unit has some inactive pixels within acceptable tolerances which may result in inactive dots
on the picture screen. This will not affect the picture quality or the life expectancy of the unit.

Authorized representative responsible for the European Union Community Market

SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg

E.U. ONLY

Caution Concerning Lamp Replacement

See “Replacing the Lamp” on page

52

.

PRODUCT DISPOSAL

This product utilizes tin-lead solder, and lamp containing a small amount
of mercury. Disposal of these materials may be regulated due to
environmental considerations. For disposal or recycling information,
please contact your local authorities, the Electronics Industries Alliance:
www.eiae.org, the lamp recycling organization www.lamprecycle.org,
or Sharp at 1-800-BE-SHARP.

«
...
4
5
6
7
8
...
»

Содержание XR-32S - Notevision SVGA DLP Projector










































































Отзывы:

Нет отзывов

Похожие инструкции для XR-32S - Notevision SVGA DLP Projector

SX50 - REALiS SXGA+ LCOS Projector

Бренд: Canon Страницы: 66

Бренд: Canon Страницы: 28

Бренд: Banner Страницы: 4

PTAE3000U - HOME THEATER LCD PROJECTOR

Бренд: Panasonic Страницы: 60

Бренд: NEC Страницы: 72

Giotto Home Cinema

Бренд: Euroscreen Страницы: 33

Бренд: Transtector Страницы: 9

Бренд: Hitachi Страницы: 113

Бренд: Hitachi Страницы: 124

Бренд: Hitachi Страницы: 124

Бренд: JVC Страницы: 80

Бренд: JVC Страницы: 4

Бренд: JVC Страницы: 2

Presentation Solutions

Бренд: Panasonic Страницы: 2

PJLink PT-LB360

Бренд: Panasonic Страницы: 8

PJLink PT-LB330

Бренд: Panasonic Страницы: 8

Бренд: Panasonic Страницы: 6

Бренд: Panasonic Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды