Sharp XL-UH242, Руководство по эксплуатации

Страница: 25 / 40

03/12/17 XL-UH242 20-28.fm
25
XL-UH242
USB Memory Playback
Note:
To pause playback:
Press the CD/USB
button.
Auto power off function:
In the stop mode of USB operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
To remove USB memory device
Notes:
SHARP will not be held liable for the loss of data while the USB
memory device is connected to the audio system.
Files compressed in MP3 and / or WMA format can be played
when connected to the USB terminal.
This USB memory’s format supports FAT16 or FAT32.
SHARP cannot guarantee that all USB memory devices will work
on this audio system.
This USB memory cannot be operated via USB hub.
If "NO SUPPORT" is displayed, it means "Copyright protected
WMA file" or "Not supported playback file" is selected.
In case the data inside the USB memory is large, it may take
longer time for data to be read.
The USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
3
Select desired file to be played back by pressing the
or button. Proceed to step 5.
4
Select desired file to be played back by pressing the
or button. (Folder mode off)
5
Press the / (USB / ) button.
Playback will start and the file name will be displayed.
Title, Artist & Album name are displayed if they are recorded in
the USB memory device.
Display content can be changed by pressing the DISPLAY button.
( 1) MP3 ID3-Tag only supports version 1.x.
( 2) Only appears when clock is already set.
File Name Display Title Display
Function Display Artist Display
TITLE-1 Indicator
TITLE-2 Indicator
Clock Display Album Display
TITLE-3 Indicator
( 1)
( 1) ( 2)
1
Press the USB button on remote control. Wait until
"UNPLUG OK" appears on FL display.
2
Disconnect USB memory device from the USB terminal.