Sharp XL-DV75H, Руководство по эксплуатации

Страница: 29 / 36

XL-DV75H_EN
29
2009September 15
Listening to the radio
Notes:
●
When radio interference occurs, auto scan tuning may
stop automatically at that point.
●
Auto scan tuning will skip weak signal stations.
●
To stop the auto tuning, press the TUNING ( or )
button again.
●
When an RDS (Radio Data System) station is tuned in,
the frequency will be displayed first, and then the RDS
indicator will light up. Finally, the station name will
appear.
●
Full auto tuning can be achieved for RDS stations
“ASPM”, see page 30.
●
Tuning will stop when reach to 87.50 MHz or 108.00
MHz.
To receive an FM stereo transmission:
Press the AUDIO button to select FM mono or FM stereo.
●
“ST” will appear when an FM broadcast is in stereo.
●
If the FM reception is weak, press the AUDIO button to
extinguish the “ST” indicator. The reception changes to
monaural, and the sound becomes clearer.
Up to 40 stations for FM band can be stored and recalled
at the push of a button. (PRESET (
or ))
Note:
The backup function protects the memorised stations for a
few hours should there be a power failure or the AC power
lead become disconnected.
Press the PRESET ( or ) button for less than 0.5
seconds to select the desired station.
■
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button repeatedly to select the
TUNER (FM) mode.
3
Press the TUNING ( or ) button to tune in to the
desired station.
Manual tuning:
Press the TUNING ( or ) button as many times as
required to tune in to the desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more
than 0.5 seconds, scanning will start automatically and
the tuner will stop at the first receivable broadcast
station.
FM stereo mode indicator
DIRECT DIRECT
ON / ON /
S TAND-BY S TAND-BY OPEN / CLO S E OPEN / CLO S E
TUNING TUNING
EQUALIZER EQUALIZER VOLUME VOLUME
MEMORY MEMORY
TOP MENU TOP MENU
AUDIO AUDIO ZOOM ZOOM ANGLE ANGLE
S TEP S TEP S LOW S LOW
A S PM / PTY A S PM / PTY
RD S RD S
DI S P DI S P A-B A-B
S UB TITLE S UB TITLE
/ DIGE S T / DIGE S T
MENU/PBC MENU/PBC
RETURN RETURN
X-BA SS X-BA SS
MUTE MUTE
O S D O S D FUNCTION FUNCTION
TUNING TUNING
S ETUP S ETUP
ENTER ENTER
1 2 3
4 5 6
7 8 9
0 10 10
ON / ON /
S TAND-BY S TAND-BY
TUNING TUNING
MEMORY MEMORY
TUNING TUNING
FUNCTION FUNCTION
PRE S ET PRE S ET
RANDOM RANDOM
PRE S ET PRE S ET
PRE S ET PRE S ET PRE S ET PRE S ET
■
Memorising a station
1
Perform steps 1 - 3 in “Tuning”.
2
Press the MEMORY/DISP button to enter the preset
tuning saving mode.
3
Within 10 seconds, press the Direct Search buttons to
select the preset channel number.
Enter the channel number using the Direct Search
buttons.
To select channel 1: Press “0” and “1”.
To select channel 12: Press “1” and “2”.
4
Press MEMORY button to memorise the station. The
preset is memorised when the “MEM” indicator is gone.
If the “MEMORY” and preset number indicators
disappear before the station is memorised, repeat the
operation from step 2 onwards.
5
Repeat steps 1 - 4 to set other stations or to change a
preset station.
When a new station is stored in memory, the station
previously memorised for that preset channel number
will be erased.
■
To recall a memorised station