05/7/12
XL-DAB9H(H)E4.fm
E-36
ENGLISH
TINSZA071SJZZ
XL-DAB9H
8
Refe
rences
Troubleshooting chart
Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
General
CD player
Tuner
Remote control
Symptom
Possible cause
z
The clock is not set to the
correct time.
z
Did a power failure occur? Reset
the clock. (Refer to page 10.)
z
When a button is pressed,
the unit does not respond.
z
Set the unit to the power stand-
by mode and then turn it back on.
z
If the unit still malfunctions, reset
it. (Refer to page 37.)
z
No sound is heard.
z
Is the volume level set to "0"?
z
Are the headphones connected?
z
Are the speaker wires discon-
nected?
Symptom
Possible cause
z
Playback does not start.
z
Is the disc loaded upside down?
z
Playback stops in the mid-
dle or is not performed
properly.
z
Does the disc satisfy the stan-
dards?
z
Is the disc distorted or
scratched?
z
Playback sounds are
skipped, or stopped in the
middle of a track.
z
Is the unit located near excessive
vibrations?
z
Is the disc very dirty?
z
Has condensation formed inside
the unit?
Symptom
Possible cause
z
The FM makes unusual
noises continuously.
z
Is the unit placed near the TV or
computer?
z
Is the FM aerial placed properly?
Move the aerial away from the
AC power lead if it's located near-
by.
z
DAB channels cannot be
received.
z
Signal reception is poor. Adjust
the aerial direction (see page 7).
z
Move the unit to another room or
near the window, then tune in
manually (see page 20).
z
Sound from DAB chan-
nels is interrupted or dis-
torted.
z
Is the unit placed near the TV or
computer?
z
Move the unit to another room or
near the window, then tune in
manually (see page 20).
z
Secondary services can-
not be received.
z
Some DAB channels do not offer
secondary services. " " appears
next to the station name when
secondary services are available
(see page 19).
Symptom
Possible cause
z
The remote control does
not operate.
z
Is the AC power lead of the unit
plugged in?
z
Is the battery polarity correct?
z
Are the batteries dead?
z
Is the distance or angle incor-
rect?
z
Does the remote control sensor
receive strong light?
Downloaded from: