HEADPHONES
●
Before plugging in or unplugging the head-
phones, make sure the volume level is re-
duced.
●
Be sure your headphones have a 3.5 mm
(1/8") diameter plug and are between 16 ohms
and 50 ohms impedance. The recommended
impedance is 32 ohms.
●
When headphones are connected, the speak-
ers are disconnected automatically. Adjust the
VOLUME control for desired volume.
MAINTENANCE
■
Internal care
●
Do not touch the Laser pickup lens. If finger-
prints or dust accumulate on the pickup, clean
it gently with a dry cotton swab.
●
Dirty heads, capstan or pinch roller can cause
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
●
After long use, the deck’s heads and capstan
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours
of playing/recording time by using a commer-
cia l tap e head demagnetiser. Read the
demagnet-iser’s instructions carefully before
use.
■
External care
●
Periodically wipe the cabinet with a soft cloth
and a diluted soap solution, then wipe with a
dry cloth.
●
Do not use chemically treated cleaning cloths
or other chemicals.
RESETTING THE MICRO-
COMPUTER
Reset the microcomputer under the following
conditions:
●
To erase all of the stored memory contents (clock
and timer settings, and tuner and CD presets).
●
If the display is not correct.
●
If the operation is not correct.
1
Press the ON/STAND-BY button to enter the
stand-by mode.
2
Unplug the AC power lead from the AC INPUT
socket on this unit.
3
Whilst pressing down the MEMORY/SET button
and the BASS/TREBLE button, plug the AC
power lead into the AC INPUT socket on this unit.
Caution:
●
The operation explained above will erase all data
stored in memory, such as clock and timer set-
tings, and tuner and CD presets.
1
3
3
2,3
XL-530E(SUK) TINSE0017SJZZ
16
