Once identifying the "Scan Setting" menu option, the following screen appears. Depending on your
projector setup and port configuration you must select what com ports to scan if any. For this
example there are no other projectors connected so, no communication ports (com) need to be
selected. If the LAN address is not already in the system please input the IP address under
the LAN line item. Once the LAN address is entered depress the "Add" button and the IP address
will appear under the "IP Address", check the box next to the IP address which indicated that is a
current projector and we want the unit scanned for Status. (Refer to Figure 15)
Once the "SCAN" button is depressed on the bottom right of the scan setting screen the following
window will appear indicating the "Control PC" which is where the S.A.P.S. software is installed
is scanning the network for connected projectors by the IP address. (Refer to Figure 16)
Figure 16
Figure 15
L:\tekcentr\CACTrain\SPS_ntwk
17
10/16/2001
